Does anyone know if the f2 has a high and low speed stator? I work on boats, and outboard stators have a low speed circuit, and a high speed circuit. You will get 2 different voltages on the different circuits. When I checked voltage output from stator, into R/R, I got 12.5V on two wires, and 2.5V on the last wire. Resistance checks out ok, but I don't trust an Ohms test. My R/R got fried, my buddy gave me one off a gixxer, it works, was just curious about the voltage thing.

Yes they are 3phase stators. You will have 12 and higher on 2 phases and a lower voltage on the other!

__________________
1998 CBR F3 R.I.P.
2004 zx6r R.I.P.

Thanks for the confirmation, I've been tryin to track down a no load miss on this blasted bike.

no problem bro. a no load miss huh?? faulty coil?? but im sure youve checked the coils!

__________________
1998 CBR F3 R.I.P.
2004 zx6r R.I.P.

yeah, I've gone thru everything so far. found clogged pilot jets, helped a little, but still breaks up when cruising. headlight is starting to flicker too, that's why I was thinkin stator. it's got close to 60k miles, I think it's breakin down when it's hot